The newest HAT to come out from CARobot is the upcoming prototype SwissCHEESE HAT for the Raspberry Pi. Like the Arduino SwissCHEESE HAT, the Pi HAT is outfitted with a handful of Integrated Circuits such as the MCP3008 (Analog to Digital Converter), the TB6612 FNG (Motor Driver), the PCA9685 (PWM Driver), an EEPROM (Electronically Erasable Programmable Read-Only Memory), and of course, the J8 GPIO Expansion featured on most Raspberry Pi’s. Specifically, the ideal Raspberry Pi model is the 3-B. All those circuits work in tandem to help direct input and output from the specially crafted input and output ports for various modules, which includes but not limited to: LEDs, buttons, buzzers, sensors, motors, and servos.
The backend of the SwissCHEESE HAT will be coming from a Python library custom-made just for the HAT. The library itself will be a composition of multiple other libraries pertaining to the different circuits available on the HAT as well as other publicly available libraries. A large chunk of the libraries happen to be Adafruit’s open source Python libraries for the PCA9685 and the MCP3008!
The inner machinations of how the HAT controls input and output are thanks to the MCP3008 and PCA9685 respectively. For input, the MCP3008 can convert analog signals (a total of 8 different channels with 10-bit resolution, or from values of 0 to 1023) into digital values. The chip uses the SPI (Serial Peripheral Interface) to communicate with the Pi itself, using various communication lines such as the clock, Master Input/Slave Output (MISO), & Master Output / Slave Input (MOSI). On the other end, we have the PCA9685 controlling the outputs using I2C, or Inter-Integrated Circuit. The circuit produces PWM (Pulse-Width Modulation) signals that are sent with a specific frequency and duration of when it is ‘high’, also known as duty-cycle. The chip has a total of 16 different channels, featuring capabilities of 12-bit resolution, but is also able to go beyond up to even 16-bit resolution. Using a system of two signal lines, the SDA and SCK line, for data and the clock respectively, can communicate with the Pi.
The library is made up of several classes, functions inside these classes, and a couple hierarchies that branch over the two major types of modules that will be used with the Pi – input and output. The style that it emulates is Object-Oriented Programming, for the sake of specializing modules individually. To put it quickly for the sake of brevity, the individual module classes inherit the parent class for initialization of the pin and determine the signal that is receiving or is sending out based on whether it is an input or output. The existence of the individual classes is for specialized functions that only work with the module itself, such as the flickering of an LED, or the spinning a servo. Specialized classes are also made for unique modules such as the motor and ultrasonic sensor, which operate on more than one signal line. Ultimately, the library should feature a comprehensive class hierarchy of every module that is available to CARobot’s SwissCHEESE disposal, as well as unique functions for these modules. The library draws inspiration for some functions and their purpose from already available Python libraries such as the RPi.GPIO, gpiozero, and Adafruit libraries. As the prototype develops further and further into a polished piece of hardware, the Python library too will also grow.